Jiangxi Nanma Electrical Co., Ltd. has extended its D4E series limit switch line with four models on one 18 mm wide body. The range covers roller plunger, flat plunger, sealed roller plunger and roller lever heads. All four are panel mount units with screw terminals and one change-over contact. These units work well for installations where panel space is constrained.
Four actuators, one footprint
Every model uses the same panel cutout: two ø4.2 mm holes at 33 mm centre-to-centre spacing. The three plunger types carry an M14 × 1 threaded bushing and two panel nuts, so a plunger limit switch can sit at different heights on a bracket. D4E-1C20N sits lowest at 25.4 mm operating position, the sealed D4E-1D20N highest at 41.3 mm. Since the body stays identical, the product family shares a single bracket drawing.
Force and travel
The three plunger limit switches need 11.77 N maximum operating force and release at 4.90 N minimum, with 1.5 mm pre-travel and 3 mm overtravel. D4E-1G20N is lighter at 3.92 N, with 2 mm pre-travel and 4 mm overtravel; its swing arm is hard-oxidized against rust. Rated load is AC-15 2 A at 125 VAC and DC-12 2 A at 48 VDC, which places this compact enclosed limit switch in control-circuit use. Contacts are pure silver with snap-action performance. Wiring is completed via three screws marked NC, NO and COM.
Where the range fits
Most compact enclosed limit switches go into machine tools, conveyor systems, packaging equipment, automated production lines, lifting machinery and textile machinery. A machine tool usually takes the roller plunger to read a moving slide or a tool changer arm. Conveyor and packaging stations lean on the roller lever, whose arm absorbs a little misalignment and still trips at 3.92 N. Lifting and textile lines choose the sealed roller plunger where oil mist and lint collect on the boot. Thanks to its shared mounting layout, one drawing for this mechanical limit switch serves all six application areas. Spare parts can be selected from the same product line.
Production and supply
Nanma has built control switches since 2001, with a sales office in Liushi, Wenzhou and a 6,000 m² plant in Ruijin, Jiangxi, where D4E series limit switch housings are assembled. The catalogue also covers micro switches, foot switches and travel switches. Buyers can combine these items within a single purchase order. All models feature this common housing, supporting mixed-actuator orders within one shipment.
FAQ
Q: How does it mount?
A: Two ø4.2 mm holes at 33 mm centres. The plunger models add an M14 × 1 threaded bushing and two panel nuts, so height can be set on the bracket.
Q: What terminals does it have?
A: Three metal screw terminals marked NC, NO and COM, wired to one change-over contact with snap action.
Q: Do all four models fit the same cutout?
A: Yes. Every model uses the 18 mm wide body and the same hole pattern, so no redrilling is needed when the actuator changes.
Q: Which certifications are marked on the product?
A: CE, CB, CQC, CCC and RoHS.
