Jiangxi Nanma Electrical (CHNANMA) has added the D4V-8112Z to its D4V series, a roller plunger limit switch for machine-position-confirming applications. On this mechanical limit switch, a metal roller contacts cams, sliding carriages, or moving-gate edges and triggers the contacts at the pre-set bracket position.
What the Roller Actuator Does
The roller rolls across the cam or trip dog, so this roller plunger limit switch delivers repeatable trigger points under angled-cam and over-travel conditions. Rolling contact lowers the side load applied to the plunger, and the actuator turns incidental sideways force into rotation as the moving part passes the head. Rubber sealing at the plunger guide and cable entry keeps workshop dust and chips out. Housing size, mounting holes and actuator travel match the rest of the D4V series, so this mechanical limit switch reuses existing brackets, with only the top roller actuator changed.
Electrical Rating and Build
The housing is die-cast zinc alloy and the contacts are silver. Rated voltage covers 125 VAC and 250 VAC, with 8 VDC to 250 VDC. The mechanical limit switch is rated for at least 500,000 electrical operations and carries an IP65 protection degree. This travel limit switch trips at an operation position of 37 ± 0.8 mm, with operation force held to max. 900 g. Over-travel measures min. 4 mm, giving the roller plunger limit switch working room past the trip point.
Mounting Notes
Install this roller plunger limit switch so the moving part slides past the roller head rather than pressing straight down on it. Response depends on position, so this travel limit switch suits slow-moving gates and fast slides alike within the rated travel.
Where It Works
The roller actuator suits cam-actuated triggering at punching stations, on hydraulic actuators, linear motion slides, lifting machinery, automated gates, and automated transfer equipment. At conveyor transfer points and packaging stations, a travel limit switch in this format reports carriage position as cams and edges pass the roller. One unit per detection point can feed a stop, interlock, or signal circuit, and two mechanical limit switches fitted on one sliding guard cover both ends of travel for stroke-end position monitoring.
Our Advantages
- 6,000 m² production floor with over 20 years of experience in industrial control switches, with quality checks at each production stage.
- We keep stock for common models, so supply stays stable and lead times stay predictable.
- We manufacture the switches in-house, which keeps pricing competitive on repeat orders.
Get In Touch
Evaluating components for your automation project? Reach out to our sales team to get D4V‑8112Z pricing, sample options and lead‑time details.
