Jiangxi Nanma Electrical (CHNANMA) has released the D4V-8111Z, a compact plunger limit switch for machine builders who need a position signal at a fixed point. This mechanical limit switch works through a metal plunger under a rubber boot and does its sensing on presses, jigs, and conveyor lines.
Why the Direct Plunger Design Matters
The actuator of this mechanical limit switch sits on top of the housing and works by direct contact, so it mounts close to the part it senses. Pressing the plunger changes the contact state; releasing it lets the contacts return to their resting position. The trip point stays where you set it. The boot keeps chips and coolant off the plunger shaft, which matters in shops that run coolant all shift. In guards and end-of-stroke pockets, a travel limit switch in this format fits the space and keeps the sensing point exactly where the machine needs it.
What It Is Built With
The housing is zinc alloy and the contacts are silver. Those details help a mechanical limit switch hold low contact resistance as it ages. This travel limit switch carries a rated electrical life of 500,000 operations or more and an IP65 rating against dust and water spray on the machine side. Operating force tops out at 900 g, with 4 mm or more of over-travel, giving the plunger limit switch room past the trip point.
Mounting Notes
Installation comes down to one rule: this plunger limit switch wants straight, inline pressure. Bolt it to a flat, rigid surface and set the cam or stop so the load hits the plunger head on-center. Side load and lateral impact shorten the service life of any mechanical limit switch. Leave the over-travel distance the machine design calls for.
Where It Works
These switches go where a machine has to confirm a position before the next step runs: punch presses, hydraulic machines, machine tools, automated jigs, conveyor stoppers, door position detection. On a press or a jig, the plunger limit switch tells the controller the slide reached its set point. On a conveyor or a door, a travel limit switch reports the moving part is in place or fully closed.
About the Factory
Jiangxi Nanma Electrical Co., Ltd. (CHNANMA) has built industrial control switches since 2001 and exported for more than 20 years, with production based in Ruijin, Jiangxi, while we maintain a sales office in Liushi, Wenzhou, Zhejiang. The D4V-8111Z plunger limit switch holds CE, CB, CCC, CQC and RoHS certifications. We support sample orders as well as both small-batch and large-volume orders.
Get In Touch
Ready to test a mechanical limit switch on your own line? Contact our sales team for D4V-8111Z plunger limit switch pricing, samples, and lead time.
