New Release: SN Series Limit Switch For Mechanical Travel Detection

Nov 14, 2026

Leave a message

CHNANMA has introduced the SN Series Limit Switch for mechanical travel, end-position, and position feedback control. The red housing, black front cover, zinc alloy base, and metal actuator assembly give the product a clear industrial form. As a metal bodied limit switch, it is intended for equipment that needs a defined contact change when a moving part reaches a set position. The housing is rated IP67, and the wiring holes are fitted with waterproof plugs.

The snap action limit switch uses a defined switching movement for control circuits during machine cycles. The stated ratings are 600VAC and 10A. The SN4 series limit switch is available with five actuator arrangements, so the selection can follow the machine approach direction, available clearance, and contact path.

 

Five Actuator Options

The model range covers common mechanical triggering modes for factory-site equipment. Verify actual travel and mounting space before selecting this industrial limit switch.

- SN4111-SP-C: Top pin plunger

- SN4112-SP-C: Top roller plunger

- SN4102-SP-C: Side roller plunger

- SN4104-SP-C: Fixed side rotary roller lever

- SN4108-SP-C: Adjustable side rotary roller lever

 

Applications and Series Information

The SN Series is intended for mechanical travel and position limit control in industrial automation equipment, machine tools, lifting machinery, elevators, conveyor systems, packaging equipment, and textile machinery. It can also be used for door position feedback when the actuator movement and control circuit are properly matched. A metal bodied limit switch may be considered where the installation requires a firm base and an enclosed switching unit.

The listed certifications for the series are CE, CB, CCC, CQC, and RoHS. Jiangxi Nanma Electrical Co., Ltd., the manufacturer identified for CHNANMA products, was founded in 2001 and has a sales center in Liushi, Wenzhou, together with a 6,000-square-meter production base in Ruijin, Jiangxi. Its product range also includes micro switches, foot switches, travel switches, and other industrial control components.

 

Selection Notes for Equipment Builders

When picking the proper variant, match the actuator style to machine movement: use pin plunger for direct-line contact, roller-type for rolling or lateral approach, adjustable lever for variable trigger positions.

The SN4 series limit switch should be chosen according to the machine layout, required travel, circuit load, cable entry, and environmental conditions.

If the switch is included in a safety-related circuit, the equipment manufacturer must evaluate the complete control architecture and relevant safety components. This general-purpose product does not carry PL or SIL functional-safety certification. The snap action limit switch must be wired according to the equipment design and applicable electrical requirements.

 

SN Series Limit Switch

Send Inquiry