The so-called micro switch can open the switch with a very small force, and the distance between the contacts is relatively small, and the torque is relatively large. - Generally speaking, the size is divided into small and ultra-small, and one is super-small. Customers can look at the size of the switch they need to buy according to the specific situation. A lot of mouse buttons used in our daily life are the function of micro switches, and when manually welding micro switches, try to choose a temperature lower than 320°C, and ensure that the configuration can be completed within three seconds. At the same time, it should be noted that when working, do not put pressure on the terminal part, otherwise the equipment may not work normally. If the switch is used on a relatively small current or voltage, it is best to use a low-power circuit, that is, Au cladding contacts. At the same time, when the switch is in use, pay attention to waterproofing, and the temperature should also be within the specified range. Only when all the above conditions are met, can this type of switch be able to exert its maximum power and ensure the normal operation of the equipment. Only in this way can the service life of the switch be extended.
