Indicator Function

Apr 16, 2021

Leave a message

1. Oil indicator

The function of the indicator light is to display the oil pressure condition in the engine. When the key door is opened, the indicator light is on when the vehicle is self-checked, and it goes out after starting. According to the Gangcheng Driving School, the indicator light is always on, indicating that the engine oil pressure of the car is below the prescribed standard and needs to be repaired.

2. Water temperature indicator

The water temperature indicator lamp mainly displays the temperature of the coolant in the engine. It only lights up for a few seconds during the vehicle self-inspection, and is usually off. Usually we hear a lot of so-called engine "boiling", which means that the temperature of the coolant exceeds the specified value. At this time, the driving should be suspended immediately for maintenance.

3. Handbrake indicator

The most common mistake a novice makes is that the handbrake is turned on but not released. The indicator is a circle! Or the letter P, it is usually off. When the handbrake is pulled up, the indicator light automatically lights up. At present, only some models have a warning sound that the handbrake is not used when driving.

4. Battery indicator

The battery life of a new car is at least two years, but if it is a used car or a stock car, you need to pay attention to this indicator in advance. This light is also on during vehicle self-checking and goes out after starting. If the indicator light is always on after startup, it means that the battery needs to be replaced.

5. ABS indicator light

The ABS light does not flash when the engine is turned on or does not go out after starting, indicating that the ABS is malfunctioning.

6. Seat belt indicator

The indicator light showing the status of the seat belt, depending on the model, the light will be on for a few seconds to give a reminder, or it will not go out until the seat belt is fastened, and some cars will also have a sound reminder.

7. Engine working status indicator

It lights up after switching on the switch, and goes out after about 3-4 seconds, and the engine is normal. If it is not on or keeps on, it means that the engine is faulty and needs to be overhauled in time.

8. Brake indicator

The function of this car indicator light is to show the brake disc wear and the status of the brake system. If it is always on, the brake system should be checked immediately.

9. Refueling indicator

Seeing this light is on, it means that the amount of fuel in the fuel tank is low, and it is best to enter the gas station immediately.

10. Airbag indicator light

The airbag indicator light is an indicator light that shows the working status of the airbag. It lights up after the switch is turned on and goes out after about 3-4 seconds, indicating that the system is normal. If it is not on or constant, it indicates that the system is faulty.


Send Inquiry