Micro switch manufacturers have rich experience in making micro switches, and they have been in the industry for more than ten years. I will share with you several methods of micro switch wiring. The following editor will take everyone to take a look
Speaking of the wiring method of the micro switch, it is actually very simple. Generally, from the wiring diagram of the micro switch, the micro switch has three points. One of these three points is a common point, one is a normally open point, and the other is The closing point, the common point, is just like the zero line in the socket. The normally open point is the point where the switch is opened and the current flows. The closed point is of course the contact point through which the current passes. According to the wiring diagram of the micro switch, connect the corresponding point to the corresponding position. Although the wiring method of the micro switch seems very simple, it is still necessary to make relevant preparatory measures.
Principle of the micro switch wiring diagram: in the micro switch, its rotating elements include buttons, push pins, rollers and levers, etc., as long as the external mechanical force is applied to the spring through the rotating element, when the reed is displaced When the critical point is reached, an instantaneous action is generated, so that the reed can touch the contact, thereby achieving disconnection and rapid connection. The working principle can also be seen from the wiring mode of the micro switch. As for the wiring diagram of the micro switch, it is only used as a reliable reference design drawing when operating the connection, and the entire design circuit is clarified, so that problems will not occur in the midway wiring.
