Waterproof microcontrol switch is a fast conversion switch driven by pressure. The waterproof microcontrol switch is covered by the shell, and there is a driver rod outside. Because the contact distance of the switch is relatively small, it is called a micro switch. This time, Tongda Electronics introduced the main points of the waterproof microcontrol switch (FSK-14 series, FSK-18 series, FSK-20 series).
1. Waterproof micro switch cannot be repeatedly operated by applying gravity. If you press the handle button and further pressurize, the excessive load weight may cause the waterproof microcontrol switch reed (shift) to deform and cause failure.
2. Especially, if the horizontal pressure type is excessively large load, the riveting part will be damaged, which will cause damage to the waterproof microcontrol switch. Therefore, when installing and operating waterproof microcontrol switches, please be careful not to add loads higher than too large loads (29.4N, 1 minute, 1 minute, 1).
3. Please set the waterproof microcontrol switch in the direction of the handle in the vertical direction. Only pressing one side of the handle or diagonal operation may reduce durability.
4. Waterproof microcontrol switch is dusty. Because it is a switch without a sealing structure, please do not use waterproof microcontrol switches in places with many dusty places.
