The so-called micro switch can open the switch with a very small force, and the distance between the contacts is relatively small, and the torque is relatively large. -Generally speaking, the size above
It is divided into small and ultra-small, and there is also a super-small. Customers can look at the size of the switch they need to buy according to the specific situation. Our daily day
A lot of mouse buttons used in the game are the effect of micro-switches. So what kind of environment is required for the installation and operation of this switch?
When manually welding the micro switch, try to choose a temperature lower than 320°C, and you can ensure that the configuration can be completed within three seconds. At the same time, it should be noted that when working
At this time, never put pressure on the terminal part, otherwise the equipment may not operate normally. If the switch is used on a relatively small current or voltage, it is best to choose
Low-power type circuit, namely Au clad contact. At the same time, when the switch is in use, pay attention to waterproofing, and the temperature should be within the regulatory range. Only meet the above--cut strips
Only by making this type of switch can play its maximum function from 2 to ensure the normal operation of the equipment. Only in this way can the lever be enough to extend the service life of the switch.
