1) When fixing the main body of the switch, please use the M2 small screw on the smooth surface with a torque below 0.098N·m. In addition, to prevent screws from loosening, it is recommended to use washers at the same time.
2) Please note that the action body should not directly exert force on the button or the driver in the free state, and should exert force on the button in the vertical direction when used.
3) The action setting after the action is based on 70 [%] or more of the O.T. value. In the case of the switch, do not set the action body in the position of the action limit, so as to avoid the impact of the accompanying opening and closing, passing stroke to shorten the life.
