The detection accuracy of the microswitch can reach 3 decimal places, and it is usually used in some cases that require high-precision detection.
First, micro switch introduction
Microswitch is also called point switch, is a kind of elastic deformation of the spring plate, through the contact and separation to achieve the circuit opening and closing, widely used in a variety of electronic equipment, instrumentation and automation control fields. Microswitches have the advantages of miniaturization, high reliability, sensitive action and long life, and are widely used in industrial control, home appliances, communications, aerospace and other fields.
Second, micro switch detection accuracy
The detection accuracy of the microswitch can reach 3 decimal places, but it is usually not necessary to achieve such a high accuracy. The specific accuracy requirements will vary depending on the application scenario. In general, in some cases that require high-precision detection, the detection accuracy of the microswitch will be higher. For example, in some precision instruments, the position control accuracy of the micro switch is very high, and the error of the micro switch needs to be ensured as small as possible.
Third, the impact of detection accuracy on microswitches
The detection precision of microswitch has certain influence on its performance and application. If the detection accuracy is not high enough, it may lead to an increase in error, which affects its normal use. For example, in some automatic control systems, when the micro switch controls the motor, cylinder, pneumatic actuator and other equipment, too much error may cause the equipment to fail to work normally, resulting in production accidents.
Fourth, improve the detection accuracy of the microswitch
There are several ways to improve the detection accuracy of microswitches:
1, the selection of high-precision testing equipment, in the manufacture of microswitches to strengthen the control of its accuracy.
2. Optimize the design of the contact material and spring plate of the micro-switch to improve the stability and sensitivity of the micro-switch.
3, when using the micro switch, it is regularly tested and maintained to ensure that its performance and accuracy are unchanged.
