-
In Line Foot SwitchName: Foot switchModel: FS-502Material: Zinc alloy shellBuilt in switch model: Z-15GW22-BContact: 1NO+1NCOperating speed: 0.5mm~50cm/sContact resistance: 25m Ω maximum value (initial value)Electrical
-
Single Foot SwitchFS-01 single-foot metal pedal control switchThe foot switch controls on and off, frees hands, is safe and convenient to operate, has a high IP65 protection level, is durable and resistant, has stable
-
Safety Foot SwitchProduct Introduction: Safety Foot Switch NMFS-301 In the application of the electronic industry, such as small diamond, terminal machine configuration, there are automatic, and inch, inch is the
-
Emergency Foot Stop ButtonFS-201 202 Single Electric Foot Metal Pedal Control Switch. Foot switch is widely used in medical equipment, stamping equipment, welding equipment, textile equipment and printing machinery.
-
Foot Operated Power SwitchName: Foot switch. Model: FS-1. Material: Iron. Working voltage AC220V AC380V. Load: AC250V 5A. Contact: 1NO+1NC. Working temperature: -10~+70 ℃. Operating humidity:<95%. Contact: 1NO+1NC. Protection
-
Foot Operated Electrical SwitchSingle Electric Foot Metal Pedal Control Switch FS-2. Foot switch is a kind of switch that can control the circuit on or off by stepping on or off. It is used in the control circuit that can't be
-
Foot Pressure SwitchSingle Electric Foot Metal Pedal Control Switch FS-402 LT3. LT1 is classified into protective type and waterproof type according to the protection grade. According to the number of pedals, it can be
-
Industrial Foot Pedal SwitchSingle Electric Foot Metal Pedal Control Switch YDT1-88 Yellow. Foot switch is widely used in medical equipment, stamping equipment, welding equipment, textile equipment and printing machinery.
-
Momentary Foot Pedal SwitchSingle Electric Foot Metal Pedal Control Switch YDT1-17. Foot switch is widely used in medical equipment, stamping equipment, welding equipment, textile equipment and printing machinery.
-
Footswitch UniversalSingle Electric Foot Metal Pedal Control Switch YDT1-20 YDT1-101. Foot switch is a kind of switch that can control the circuit on or off by stepping on or off. It is used in the control circuit that
-
Dual Foot Pedal SwitchDouble Electric Foot Metal Pedal Control Switch YDT1-15. Foot switch is widely used in medical equipment, stamping equipment, welding equipment, textile equipment and printing machinery.
-
Universal Foot switchName: Silver Dot High Quality Double Pedal YDT1-16 Aluminum Case Double Pedal Switch. Model: YDT1-16. Contact Material: Silver Contacts. Material: Aluminum alloy. Rating load:AC380V 10A. Operating
In-line Foam Inductor Line Proportioner offers a simple accurate method of proportioning when the water supply pressure is reasonably high. Each proportioner is designed for a set water pressure....
In-line foam inductors pick up foam concentrate and add them to the water which is flowing in the firefighting hose. This function is governed by the venture effect: The bottleneck in the inductor...
Line Proportioner offers a simple accurate method of proportioning when the water supply pressure is reasonably high. Each proportioner is designed for a set water pressure. However, higher or lower...
This series of inline eductors are rated for nominal flow rates ranging from 60 gpm to 250 gpm (227 Lpm to 946 Lpm) at 200 psi (13.8 bar) inlet water pressure. The eductor body and venturi jet are...
Jul 31, 2010 · Eductors are typically pumped with a 200-psi inlet pressure. This is due to the high friction loss, roughly 30 percent, through the small Venturi area. The pick-up tube can be placed...
In-Line Eductors. Protek's Foam Eductors range offers the In-Line Eductors and the Portable By-Pass Eductors. The eductors feature a removable metering valve, and a large and easy-to-read...