XCMD2110L1 Metal End Plunger Limit Switch 1NO 1NC

Send Inquiry
XCMD2110L1 Metal End Plunger Limit Switch 1NO 1NC
Details
Model: XCMD2110L1 Metal End Plunger Limit Switch
Housing: Metal or flame-retardant PBT plastic, optional
Body Size (W×H×D): 30×50×16 mm
Contacts: 1 NO + 1 NC
Operating head movement: Linear
Operator type: Spring return plunger metal
Approach type: Vertical approach, 1 direction
Contact Operation: Snap action
Switch actuation: On end
Protection: IP66/IP67/IP68, IK06, waterproof & oil-proof
Certifications: CE, CB, CQC, RoHS
Applications: machine tools, packaging equipment, automated assembly lines, material-handling machinery and general industrial automation equipment.
Category
XCMD Series Switch
Share to
Description

Product Introduction

The XCMD2110L1 is a plunger limit switch for position detection as a moving component presses straight against the switch. Its metal-end plunger moves along a linear axis and accepts force from only one direction, so this plunger limit switch actuates at the end of a stroke. Contacts operate by snap action: they change state at a set travel point and maintain that state, so the switching point does not shift with machine speed. This is why a snap action limit switch is selected for end-stop duty. The operator is spring-returned upon each actuation, and the plunger tip is metal rather than plastic to withstand repeated contact with a cam or a dog. It offers optional housing materials and features factory-pre-wired cables, so this industrial limit switch suits equipment built for export markets.

 

Key Features

 Snap action design for signal switching when mechanically actuated

 Optional metal or flame-retardant PBT housing

 Equipped with thickened pure copper cable; standard length 1m, cable length can be customized

 Good electrical conductivity for signal transfer

 Flame-retardant housing

 Simple body mounting

 Multiple available specifications

 Consistent product quality

 

Specifications

Figures below are for the standard build. The only choice that changes with an order is housing material; the rest of this plunger limit switch is fixed, and every unit ships as a snap action limit switch with a spring-return metal plunger.

- Housing: Metal or flame-retardant PBT plastic, optional

- Body size (W × H × D): 30 × 50 × 16 mm

- Contacts: 1 NO + 1 NC

- Operating head movement: Linear

- Operator type: Spring return plunger, metal

- Approach type: Vertical approach, 1 direction

- Contact operation: Snap action

- Switch actuation: On end

- Protection: IP66/IP67/IP68, IK06, waterproof and oil-proof

- Certifications: CE, CB, CQC, RoHS

product-581-268

 

Applications

This plunger limit switch provides end-of-stroke detection for machine tools, packaging equipment, automated assembly lines, material-handling machinery and general automation equipment. As a snap action limit switch, it outputs consistent signals even with brief part contact and verifies fixed positions for moving components; proper alignment between the plunger head and travel path is essential for stable signal output. This industrial limit switch performs reliably in wash-down and chip-laden environments, where cutting-fluid splash may occur, its metal operator resists high-speed cam impact, and its compact size enables striker-plate installation on narrow slides for cycle-based position feedback without additional electrical hardware.

FAQ

Q: What is the main difference between XCMD2110L1 and XCMD2107L1?

A: XCMD2110L1 is a spring-return metal plunger design for only vertical one-direction force. XCMD2107L1 is flexible spring-wire type which accepts multi-angle contact force.

 

Q: Can this industrial limit switch be triggered by side impact?

A: No. This plunger limit switch is designed for vertical-direction force only. Lateral force may cause damage and unstable signal.

 

Q: Which housing material should I choose?

A: Metal housing suits heavy-impact scenarios; flame-retardant PBT plastic works well for general-purpose indoor automation environments.

 

Q: Is this switch suitable for safety-critical stop circuits?

A: It is intended for general-purpose position feedback. Please complete full-system risk assessment before applying for safety-related stop functions.

 

 Plunger Limit Switch

product-750-1576product-750-1566product-750-970product-750-854

product-750-916

Hot Tags: xcmd2110l1 metal end plunger limit switch 1no 1nc, China, suppliers, manufacturers, customized, wholesale, cheap, discount, bulk, in stock, free sample

Send Inquiry