Cross Roller Plunger Limit Switch D4V-8122Z

Send Inquiry
Cross Roller Plunger Limit Switch D4V-8122Z
Details
Model: D4V-8122Z Limit Switch
Rated Voltage: 125VAC / 250VAC, 8VDC-250VDC
Inrush Current: N.C. Max.24A, N.O. Max.12A
Contact Resistance: Max.25mΩ (initial value)
Insulation Resistance: Min.100MΩ (below 500VDC)
Electrical Life: Min.500,000 operations
Protection Degree: IP65
Operation Force: Max. 900g
Over-Travel: Min.4mm
Operation Position: 37±0.8mm
Ambient Temperature: -20℃- +70℃ (No icing)
Certifications: CE, CB, CCC, CQC, RoHS
Applications: Conveyor direction detection, vertical stroke positioning, lifting machinery limit control, automated gate monitoring, machine tool cross-axis sensing
Category
D4V Series Switch
Share to
Description

The D4V-8122Z is a cross roller plunger limit switch for machines requiring repeatable vertical-axis position signals. A cam plate or moving carriage presses the top roller to drive the plunger and switch contact states. Its zinc-alloy housing is fitted with silver contacts, and a rubber boot protects the plunger guide from metal chips and dust. This travel limit switch triggers at a fixed operating position, so mounting brackets can be pre-configured per drawings without on-machine adjustment. The two-piece housing secured by two screws simplifies maintenance.

Only the plunger and roller move, limiting wear mainly to the contacts. With the cover closed and cable gland tightened, the sealed contact chamber defends against dust and water jets, suitable for environments with coolant splashes. Built-in over-travel tolerance permits slight movement past the trigger point without damaging internal parts. Note that this mechanical limit switch is intended for end-of-stroke and position sensing, not high-speed cycle counting.

 

Key Features

 Zinc‑alloy die‑cast housing delivers solid mechanical rigidity against mechanical impact in shop‑floor conditions

 Internal silver contact set ensures stable signal transmission under repeated mechanical triggering

 Split‑type housing structure enables convenient on‑site inspection and component access without full unit disassembly

 Rubber boot shields plunger guide assembly from metal chips, fine dust and coolant splashes

 Fixed‑point triggering characteristic allows pre‑setting of mounting fixtures based on mechanical drawings

 Compatible installation footprint matches mainstream D4V series for direct field replacement of existing units

 

Key Specifications

- Model: D4V-8122Z

- Rated voltage: 125 VAC / 250 VAC; 8 VDC to 250 VDC

- Inrush current: N.C. max. 24 A; N.O. max. 12 A

- Contact resistance: max. 25 mΩ (initial value)

- Insulation resistance: min. 100 MΩ (below 500 VDC)

- Electrical life: min. 500,000 operations

- Protection degree: IP65

- Operation force: max. 900 g

- Over-travel: min. 4 mm

- Operation position: 37 ± 0.8 mm

- Ambient temperature: −20 °C to +70 °C (no icing)

- Certifications: CE, CB, CCC, CQC, RoHS

Cross Roller Plunger Limit Switch

 

Applications

Conveyor systems deploy this cross roller plunger limit switch to confirm belt direction before equipment startup. It serves vertical stroke positioning for slides and rams, stopping motion once components hit preset positions. A travel limit switch can be mounted on lifting gear at stroke ends for hoist control interlocks. It also works for automated gate position feedback and cross-axis sensing on machine tools, delivering reliable hard-wired position signals.

 

FAQ

Q: What is the difference between D4V‑8122Z and D4V‑8112Z?

A: Both are roller plunger designs. D4V‑8122Z uses vertical roller orientation, while D4V‑8112Z has horizontal roller. Select D4V‑8122Z when your cam moves vertically against the roller.

Q: What should I consider when selecting between different plunger‑style limit switches?

A: Mainly confirm roller orientation, actuation direction of your cam, over‑travel requirement and installation space on your machine.

Q: What certifications does D4V‑8122Z hold?

A: This vertical roller plunger limit switch carries CE, CB, CCC, CQC and RoHS certifications.

 

 

Cross Roller Plunger Limit Switch product-750-502

product-750-1266

product-750-1365

product-750-753

product-750-862

product-750-767

product-750-960

product-750-767

product-750-558

 

Hot Tags: cross roller plunger limit switch d4v-8122z, China, suppliers, manufacturers, customized, wholesale, cheap, discount, bulk, in stock, free sample

Send Inquiry