The QGX-NM-8 rotary gear limit switch monitors drum rotation to trigger power cut-off at pre-set hook travel positions, instead of relying on simple position estimation.
Internally, the unit uses a 1:50 gear reduction set driving a cam stack with independently adjustable cam lobes. Each lobe can be set to a specific operating angle to actuate the built-in micro-switches. As this overhead crane limit switch, it supports multi-stage functions including upper limit, lower limit, alarm and safety protection within one single unit, differing from basic trip-pin style limit devices.
Key Features
Eight integrated control circuits within one housing. Four of the channels can be assigned for high-slowdown, high-stop, low-slowdown and low-stop via the shared cam shaft. As a multi circuit rotary limit switch, remaining channels can be utilised for alarm output or secondary safety protection.
Silver-contact switching elements rated for both AC and DC circuits: 8A at AC 250V, 0.6A at DC 250V, sufficient for driving contactor coils.
Standard input shaft interface compatible with most hoist drums; accepts ring flange with 51 mm bore on 170 mm bolt circle, enabling direct bolt-on replacement for existing overhead crane limit switch.
Resin-moulded lower casing with two cable gland mounting ports
1:50 gear ratio as standard; alternative gear ratios available upon request.
Key Specifications
Gear Ratio: 1:50 (Other ratios available upon request)
Control Circuits: 8 circuits
Rated Voltage: AC 0–250V; DC 0–250V
Rated Current: AC 8A; DC 0.6A
Withstand Voltage: AC 1500V
Ambient Temperature: -25℃ ~ +70℃
Figures above are extracted from the QGX-NM-8 specification sheet and dimension drawing.
Applications
The unit mounts directly on the drum shaft or on an intermediate shaft driven by the drum, so it reads the rotation that actually sets the hook position. As a multi circuit rotary limit switch, it is used on overhead cranes, gantry cranes, electric hoists and winches, and it also fits lifting platforms and mechanical parking lifts where travel is vertical. On drum-driven mobile stages it keeps the same pre-set stop point on each cycle, which is the duty a crane hoist limit switch performs there.
Working Principle
Drum rotation drives the input shaft of the rotary gear limit switch. The 1:50 reduction gear set reduces rotational speed for the cam shaft. When a cam lobe reaches its configured angle, it actuates the corresponding micro-switch and breaks the control circuit for hoisting or lowering contactors. For this drum-driven crane hoist limit switch, minor angular adjustment of cam lobes corresponds to fixed travel displacement per drum revolution.
About Us
Jiangxi Nanma Electrical Co., Ltd. has manufactured limit switches and micro switches since 2001. The international sales office is located in Liushi, Wenzhou, Zhejiang, and our 6,000 m² production factory is based in Ruijin, Jiangxi. Our engineering team has 35-year technical background in control-switch products. In-house OEM and ODM services are available, including customisation of gear ratios and housing materials for different lifting-system requirements.











Hot Tags: qgx-1:50 rotary gear limit switch for crane hoist, China, suppliers, manufacturers, customized, wholesale, cheap, discount, bulk, in stock, free sample, Adjustable Limit Switch, End Limit Switch, Eot Crane Hoist Limit Switch, Eot Crane Limit Switch, Limit Device, TSA Series Switch